BT-150N Super Hard Cutter Grinder Introduction
Võta meiega ühendust
Tel 0086-10-62965622 0086-13910819265
Meil:[email protected]
Aadress: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

BT-150N Super Hard Cutter Grinder Introduction


BT-150N is a four-axis CNC super hard cutter grinder, which is composed of four axes, including the swing axis of the grinding wheel (X-axis), the tilt angle of the grinding wheel (B-axis), the rotation axis in the horizontal plane of the workpiece (C-axis) and the workpiece feed axis (Y-axis).

The BT-150N super hard cutter grinder is suitable for medium and large quantities of carbide inserts, PCD inserts, and CBN inserts. As long as the center is completed, the system will automatically complete grinding under the action of the weighted gravity, realizing the ideal state of “constant pressure grinding, flexible feed”.Due to the high hardness of diamond material (PCD), the grinding wheel wears quickly. The system can automatically detect and compensate the wear and maintain the dimensional accuracy of grinding for a long time.

Host And General Configuration

1) Spindle motor power: 3 kw.

2) The electric spindle adopts frequency conversion speed regulation, and the speed can be adjusted at will from 500-4,000 RPM.

3) The main shaft is cooled in circulating water.

4) The sand wheel shaft can be adjusted at any Angle from -5° to 25° from the vertical plane.

5) The maximum swing stroke of the grinding wheel is 30mm and the maximum swing frequency is 50 times/min.

6)100 times the optical CCD system.

7) Industrial control machine and grinding application software (including high-definition video display).

8) One piece of the ceramic bonded diamond grinding wheel.

Lisateavet meie toodete kohta Loe rohkem